复杂体系的结构分析和建模研究

根据复杂体系的概念及其所呈现出的多种特性,利用复杂体系的使命分解和复杂体系的元素组成对复杂体系进行综合的结构分析,描述了目标分解、功能分解和行为分解的复杂体系使命目标三阶段分解过程以及系统单元、复合元和体系外部环境的复杂体系三元素结构框架。在此基础上,提出了采用一种“两层四级”的设计思想对复杂体系进行有效的结构建模设计,并针对复杂体系内部的相互位置层次及其功能关联定义了度量实体、层级映射、系统关联性和软构层等相关概念,清晰地阐释了复杂体系结构分析和建模时体系层次映射的实质,从而为复杂体系的效能评估以及体系改进和优化提供一定的理论指导。     

直接挤出成型用环氧树脂的流变性及其可打印性

直接挤出成型制造适用于任何含或不含添加剂的膏状或凝胶状复合材料,对复合材料制造技术具有深远意义。通过探讨热固性环氧树脂的流变学行为与挤出成型特性,得出热固性环氧树脂在直接挤出成型制造应用中的通用性流变学参数。通过向复合材料中加入增稠剂,对其流变学行为进行设计。结果表明:在高剪切速率(50 s~(-1))和低剪切速率(0.01 s~(-1))下,添加30%纳米黏土的环氧树脂的流变学行为较适合挤出式3D打印工艺。利用龙门式气动挤出式3D打印机,对复合材料的打印成型质量进行试验分析和验证。结合试验结果探讨了喷头高度对复合材料成型质量的影响,并且提出适用于喷头高度临界值的计算方法。探讨了挤出率、剪切速率等因素对成型质量的作用规律。针对多层打印问题,提出包含补偿系数的多层打印的临界喷头高度的计算方法。以上研究对促进基于复合材料的挤出式3D打印具有积极意义。     

坦克兵力行为智能体模型研究

为了有效模拟兵力物理行为和智能行为的不同特性,提出了一个复合结构坦克兵力智能体模型,该模型综合了反应式行为和慎思行为两方面的优点。采用层次化组合方法建立了基于行为模式的兵力物理行为模型,使兵力智能体能对动态战场环境作出灵活的反应。结合兵力不同类型任务的分析,设计了基于规划的兵力智能行为模拟方法,使兵力智能体能按照战术原则进行作战任务规划。     

石墨烯作为水基半合成切削液添加剂的硬质合金-钢材料摩擦学特性分析

改善加工过程润滑条件是延缓刀具磨损的重要途径。将石墨烯作为3034水基半合成切削液的添加剂,研究石墨烯悬浮切削液的硬质合金-钢材料摩擦学性能,研究对象是由硬质合金YG8制备的金属球和由45#钢制备的圆盘形试件;采用球-盘摩擦副接触方式在摩擦磨损试验机上进行试验,测定了质量分数为0. 1%~0. 9%的石墨烯悬浮切削液的平均摩擦特性和摩擦系数;采用激光共聚焦显微镜对磨痕轮廓进行提取,并得出磨损定量评价指数,并用扫描电镜和拉曼光谱仪对磨痕进行磨损机理分析;进行切削实验来分析石墨烯悬浮切削液对切削性能指标的改善情况。实验分析结果表明:石墨烯悬浮切削液能明显改善硬质合金-45#钢之间的润滑条件,摩擦系数和磨损率显著下降,采用不同质量分数石墨烯悬浮切削液的平均摩擦系数较原半合成切削液下降12. 9%~57. 3%,磨损率下降33. 82%,同时切削合力较原半合成切削液下降18. 58%,加工后工件表面粗糙度下降7. 5%。     

虚拟行为机制下的恶意代码检测与预防

Cohen证明了不存在一个算法可以精确地检测出所有可能的计算机病毒。MCDPM是一种基于虚拟行为机制的恶意代码检测方法,其目的是避开Cohen结论的限制,从而实现对恶意代码的有效检测和预防。MCDPM将传统的代码行为过程分解为虚拟行为发生和实际行为发生两个部分,通过对虚拟行为及其结果的监视和分析,实现对代码行为的精确检测。由于MCDPM的分析结果是建立在代码的确切行为之上,因此其判断结果是真实和准确的。对于非恶意代码,MCDPM则可以通过实际行为发生函数将其运行结果反映到系统真实环境,保持系统状态的一致性。MCDPM可以用于对未知恶意代码的检测,并为可信计算平台技术的信任传递机制提供可信来源支持。     

弯曲载荷作用下复合材料T型接头的失效分析

运用蔡-吴逐步失效判据和黏聚接触模型建立弯曲加载下的T型接头的有限元模型。对复合材料T型接头在弯曲加载下的损伤机理和承载能力进行数值模拟。结合静态弯曲加载实验,揭示T型接头在弯曲破坏过程中的四种失效模式。T型接头的弯曲失效载荷的有限元模型计算结果与实测值吻合较好。     

Firm embedding behavior of annular grooved projectiles impacting ductile metal targets

Annular grooved projectiles (AGPs) have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates. They could become embedded solidly in the target surface during low-velocity impact. In this investigation, the firm embedding behavior of AGP was observed by impact experiments. Corresponding numerical simulations provided a better understanding of this process. Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target, unlike traditional shape such as conical projectile. According to observation, firm embedding process can generally be subdivided into four stages: initial-cratering stage, groove-filling stage, filling-material failure stage and rebound vibration stage. Moreover, the damage mechanics of target material around crater was obtained through microscopic tests. A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible, which further demonstrated that the firm embedding behavior has application potential in new concept warheads.     

防空监视网络传感器的协作管理

针对防空监视网络的传感器管理问题,讨论了基于多Agent技术的协作管理策略。通过对防空监视网络传感器协作行为的分析,建立了传感器的协作行为模型。结合防空监视传感器的功能,设计了传感器Agent的结构模型。依据防空监视网络传感器的使命要求和完成任务能力,提出了防空监视网络传感器Agent的协商处理策略。     

Selling to strategic and loss‐averse consumers: Stocking,procurement, and product design policies

Motivated by the presence of loss‐averse decision making behavior in practice, this article considers a supply chain consisting of a firm and strategic consumers who possess an S‐shaped loss‐averse utility function. In the model, consumers decide the purchase timing and the firm chooses the inventory level. We find that the loss‐averse consumers' strategic purchasing behavior is determined by their perceived gain and loss from strategic purchase delay, and the given rationing risk. Thus, the firm that is cognizant of this property tailors its inventory stocking policy based on the consumers' loss‐averse behavior such as their perceived values of gain and loss, and their sensitivity to them. We also demonstrate that the firm's equilibrium inventory stocking policy reflects both the economic logic of the traditional newsvendor inventory model, and the loss‐averse behavior of consumers. The equilibrium order quantity is significantly different from those derived from models that assume that the consumers are risk neutral and homogeneous in their valuations. We show that the firm that ignores strategic consumer's loss‐aversion behavior tends to keep an unnecessarily high inventory level that leads to excessive leftovers. Our numerical experiments further reveal that in some extreme cases the firm that ignores strategic consumer's loss‐aversion behavior generates almost 92% more leftovers than the firm that possesses consumers’ loss‐aversion information and takes it into account when making managerial decisions. To mitigate the consumer's forward‐looking behavior, we propose the adoption of the practice of agile supply chain management, which possesses the following attributes: (i) procuring inventory after observing real‐time demand information, (ii) enhanced design (which maintains the current production mix but improves the product performance to a higher level), and (iii) customized design (which maintains the current performance level but increases the variety of the current production line to meet consumers’ specific demands). We show that such a practice can induce the consumer to make early purchases by increasing their rationing risk, increasing the product value, or diversifying the product line. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 435–453, 2015     

全CFRP筋混凝土柱低周反复荷载试验研究

考虑轴压比、剪跨比和配箍形式的影响,对6根全CFRP筋混凝土柱进行低周反复荷载试验,通过分析滞回曲线、骨架曲线、位移延性系数和耗能能力等特征,研究CFRP筋混凝土柱的抗震性能。试验结果表明:CFRP筋混凝土柱具有较强承载能力和变形能力;轴压比和剪跨比是影响试件抗震性能的主要因素,轴压比越小,试件的变形和耗能能力越强,刚度退化越平缓,剪跨比越大,试件的变形能力越强;通用屈服弯矩法计算得到的延性系数能够较好反映CFRP筋混凝土柱的延性,轴压比越小、剪跨比越大,试件的延性越好;新型螺旋式矩形箍筋在试件延性及耗能方面表现良好,可以应用于工程实际。